Kernel

Exports for Kernel. More...

Enumerations
enum	SceWlanBtConfig {   SCE_WLANBT_CONFIG_INITIALIZE = 1 , SCE_WLANBT_CONFIG_SHUTDOWN = 2 , SCE_WLANBT_CONFIG_WLAN_ENABLE = 3 , SCE_WLANBT_CONFIG_WLAN_DISABLE = 4 ,   SCE_WLANBT_CONFIG_BT_ENABLE = 5 , SCE_WLANBT_CONFIG_BT_DISABLE = 6 , SCE_WLANBT_CONFIG_WLAN_RELOAD_BEGIN = 7 , SCE_WLANBT_CONFIG_WLAN_RELOAD_COMPLETE = 8 ,   SCE_WLANBT_CONFIG_BT_RELOAD_BEGIN = 10 , SCE_WLANBT_CONFIG_BT_RELOAD_COMPLETE = 11 , SCE_WLANBT_CONFIG_WLAN_RETAIN = 13 , SCE_WLANBT_CONFIG_WLAN_RELEASE = 14 ,   SCE_WLANBT_CONFIG_BT_RETAIN = 15 , SCE_WLANBT_CONFIG_BT_RELEASE = 16 , SCE_WLANBT_CONFIG_WLAN_FORCE_OFF = 17 , SCE_WLANBT_CONFIG_BT_FORCE_OFF = 18 }
	Commands accepted by ksceWlanBtSetConfiguration. More...

Functions
int	ksceWlanBtSetConfiguration (SceWlanBtConfig config)
	Configure the shared WLAN/Bluetooth device.

Detailed Description

Exports for Kernel.

---

Using this library in your project

Include the header file in your project:

#include <psp2kern/wlanbt.h> 

Link the library to the executable:

SceWlanBtForDriver_stub 

---

Enumeration Type Documentation

SceWlanBtConfig

enum SceWlanBtConfig

Commands accepted by ksceWlanBtSetConfiguration.

Pass one command; do not combine commands with |. The WLAN and Bluetooth drivers must coordinate before and after reloading their shared Marvell Robin firmware. The retention commands select which Robin function is restored across the shared device power-state transition.

Enumerator
SCE_WLANBT_CONFIG_INITIALIZE	Initialize the shared Robin WLAN/Bluetooth firmware.
SCE_WLANBT_CONFIG_SHUTDOWN	Shut down the shared Robin device and clear its state.
SCE_WLANBT_CONFIG_WLAN_ENABLE	Enable the WLAN function.
SCE_WLANBT_CONFIG_WLAN_DISABLE	Disable the WLAN function.
SCE_WLANBT_CONFIG_BT_ENABLE	Enable the Bluetooth function.
SCE_WLANBT_CONFIG_BT_DISABLE	Disable the Bluetooth function.
SCE_WLANBT_CONFIG_WLAN_RELOAD_BEGIN	Mark WLAN ready to reload the shared firmware.
SCE_WLANBT_CONFIG_WLAN_RELOAD_COMPLETE	Mark WLAN reinitialization complete.
SCE_WLANBT_CONFIG_BT_RELOAD_BEGIN	Mark Bluetooth ready to reload the shared firmware.
SCE_WLANBT_CONFIG_BT_RELOAD_COMPLETE	Mark Bluetooth reinitialization complete.
SCE_WLANBT_CONFIG_WLAN_RETAIN	Retain WLAN across a shared-device power transition.
SCE_WLANBT_CONFIG_WLAN_RELEASE	Release WLAN before a shared-device power transition.
SCE_WLANBT_CONFIG_BT_RETAIN	Retain Bluetooth across a shared-device power transition.
SCE_WLANBT_CONFIG_BT_RELEASE	Release Bluetooth before a shared-device power transition.
SCE_WLANBT_CONFIG_WLAN_FORCE_OFF	Force the shared device off on behalf of WLAN.
SCE_WLANBT_CONFIG_BT_FORCE_OFF	Force the shared device off on behalf of Bluetooth.

Function Documentation

ksceWlanBtSetConfiguration()

int ksceWlanBtSetConfiguration

(

SceWlanBtConfig

config

)

Configure the shared WLAN/Bluetooth device.

The WLAN and Bluetooth functions share one Marvell Robin device and firmware image. The two drivers must coordinate commands 7/10 and 8/11. On FW 3.60, unimplemented commands, including 0, 9, and 12, do nothing and return success.

Parameters

[in]

config

- Configuration command.

Returns

0 on success, 0x80418004 in Syscon downloader mode, 0x80418007 when a Bluetooth enable or disable command is issued while the module reports WLAN/Bluetooth unavailable, or an initialization error from commands that start the shared firmware.